American automotive history isn’t just about impressively brawny engines. Or irresistibly curvaceous chrome. Or the dependable, sensible vehicles that move steadily off the lot. That’s why our “Cars That Made America” listing attracts from all those categories—and from the duds as well.

Because in the brutally aggressive auto business, the Edsels and Vegas could be as essential because the Model Ts and Mustangs. Sometimes concepts thrown on the wall stuck. Other instances they slid slowly to an ignominious grease puddle on the ground. But every time, the entrepreneurs, marketers, designers, engineers and managers who guided American automobile manufacturing learned one thing. Failures (and there were many) typically informed later successes. Clunkers could beget crowd-pleasers.

In this rundown of influential American automobiles, we see visionary engineers scheming methods to go sooner and farther, in larger consolation and magnificence. We see model wizards tapping deep into the national psyche, evoking core American values of freedom, self-reliance and practicality. The automobiles right here vary from plain and utilitarian to sporty and fun to fantastically opulent. Many had been testosterone-fueled under the hood, whereas others had to go up the hills backward.

This subjective listing displays a various cross-section of a century’s worth of American automobile development.

WATCH: Full Episodes of The Cars That Built the World online now.

A 1901 commercial for the Oldsmobile Runabout.

Jay Paull/Getty Images

The first sensible, dependable, mass-produced American automobile
How many built: 12,000+ between 1901 and 1904
Starting worth: $650
Nickname: ‘The Curved Dash’

Ransom Eli Olds, who had began experimenting with self-propelled vehicles in 1887, was working on a number of completely different prototypes in his company’s Detroit manufacturing facility in 1901 when a fireplace destroyed the building and three of these prototypes. The solely survivor: the Model R, popularly known as the Curved Dash for its curved, buggy-like footboard.

READ MORE: 50-Plus Years of Hollywood’s Coolest Cars

By the top of the yr, Olds had built some 425 of them. Priced at just $650, the Curved Dash was accessible to a variety of potential clients. Its tiller steering and buggy-like physique had been familiar to the horse-trained public. Its rugged 7-horsepower single-cylinder engine, easy 2-speed planetary transmission, chain drive and excessive ground clearance were robust sufficient to survive the trials of the nation’s largely rugged, rutted filth tracks. It remained in manufacturing through 1904 and inspired the hit song “In My Merry Oldsmobile:”

Come away with me, Lucille,
In my merry Oldsmobile.
Down the road of life we fly,
Automo-bubbling, you and I.

A moderately in style early bid to construct a car for the plenty
How many built: 23,one hundred between 1908 and 1910
Starting value: $900
Nickname: ‘The White Streak’

A Buick Model 10 at the Long Island Automotive Museum in New York State, circa 1950s.

Carsten/Three Lions/Getty Images

When General Motors integrated in the fall of 1908, its CEO, William “Billy” Durant, went on a buying spree, constructing his empire by gobbling up the lion’s share of the competitors inside the first 12 months. (He couldn’t persuade rival Henry Ford, the opposite visionary of the burgeoning industry.) Buick, the first firm Durant acquired, became GM’s core brand. And the Model 10, painted all white with snappy brass trim, was Buick’s most popular mannequin.

The defining characteristic of the four-cylinder Model 10—and of each Buick since—was its overhead-valve cylinder head, a.k.a. the “valve-in-head” engine that gave superior performance. All Model 10s have been marketed as a car for “men with actual red blood who don’t like to eat dust.” Despite arriving on the scene simply before Henry Ford’s first Model T splashed onto the market, the Model 10 didn’t take off in the same means. Production ended when Buick realized it may construct on its reputation—and its environment friendly valve-in-head engine—to promote more expensive automobiles at higher profits.

Ford Model T, circa 1910.

Oxford Science Archive/Print Collector/Getty Images

Put the world on wheels
How many constructed: 15,458,781 between 1908 and 1927
Starting price: $825 for the Runabout mannequin; by 1925 it had dropped to $260
Nickname: ‘Tin Lizzie,’ ‘Flivver’

Simplicity. Performance. Reliability. Those have been the magic ingredients baked into Henry Ford’s wildly profitable Model T, a technical and business triumph that not only democratized driving for the masses, but in doing so, helped transform America’s landscape and culture. Farms had been no longer dramatically isolated from each other. Street paving accelerated and constructing of the nation’s vast community of roadways began in earnest. Street lights, highway signs and a whole new array of roadside businesses sprouted, including the now-ubiquitous fuel station.

Read More: The United States of Motoring

Ford additionally revolutionized trade at giant with assembly-line production, which helped speed manufacturing and push costs down. The cost of the Model T’s touring-car version dropped from $850 in 1908 to less than $300 in 1925. Such prices helped individuals who by no means aspired to driving assume that they, too, may afford a newfangled horseless buggy—and the liberty it supplied. As sales soared, Ford at instances produced more Model Ts than the next 10 automakers’ output combined.

Whereas GM’s CEO Billy Durant was known as the consummate salesman, Henry Ford made his name as a visionary, roll-up-your-sleeves engineer. He designed the Model T as a workhorse of a car, building it with mild, inexpensive vanadium metal that offered rugged sturdiness and a supple suspension that stood up to the era’s potholed wagon roads. He gave the engine 20 horsepower, which propelled the car to prime speeds of 40 to 45 miles per hour. And as a result of he wanted any moderately mechanically competent farmer to have the power to keep and restore their Model T, he made its engine’s cylinder head detachable. An unusual function for the time, that simplified the mandatory (and frequent) process of cleansing out carbon buildup in the combustion chambers and valve pockets, making it far less complicated than the rivals’ fixed-head engines.

The Model T did have its quirks. For one, the 10-gallon gas tank was positioned underneath the front seat and gasoline was gravity-fed to the engine. Because of that and the fact that reverse gear supplied more energy than the forward gears, house owners could often be seen driving up a steep hill backward.

And then there was Henry Ford’s decision to supply Model Ts in any color—as long as it was black. Ever sensible, with an eye fixed on manufacturing efficiency, he realized that the pigmented paints used in the T’s early years (red, green, gray and blue) required a quantity of coats with time between coats to dry and sand. Vast storage areas have been crammed with bodies being painted, costing the corporate both money and time. Black cured much more quickly and it grew to become the usual (and only) shade provided from 1914 to 1926. Customers didn’t seem to thoughts and manufacturing jumped by nearly two-thirds in 1915.

By 1914 the Model T’s success had made Henry Ford wealthy, however he had an issue. The shifting meeting line he had pioneered ought to have made it attainable to sell cars at ever-lower costs, however the assembly line’s repetitive duties proved unattractive at a wage of about $2.25 per 9-hour workday. Worker turnover killed productiveness; sometimes staff just walked away from their stations, bringing the complete line to a halt.

Ford’s resolution was progressive: He raised the wage to $5 per day and reduce the workday to eight hours. One day after it was introduced, a crowd estimated at 10,000 people confirmed up on the Ford plant in search of $5-a-day employment. That solved the turnover problem, letting the meeting line run effectively. Ultimately, with its manufacturing facility that, figuratively talking, sent iron ore in one aspect and completed automobiles out the other, Ford completely dominated the $300 car market.

Dodge Model 30, circa 1916.

National Motor Museum/Heritage Images/Getty Images

The first Dodge Brothers automobile
How many built: 596,770 between 1914 and 1921
Starting price: $785 for the Touring Car model

As profitable Detroit contract producers, John and Horace Dodge have been a serious provider of automotive components to business large Ford. But when Ford obtained cash-strapped and couldn’t make payments, the Dodges accepted company inventory instead. Henry Ford purchased the inventory again in 1919, giving the Dodge brothers a $25 million windfall.

But even while the Dodges were an important component to Ford’s success, they weren’t all that impressed with the Model T. John Dodge is quoted as saying, “Someday the individuals who personal a Ford are going to need an automobile.”

The Model 30 was the Dodge Brothers’ thought of what a cheap automobile should be: a well-built, durable automotive with more energy and extra normal options than the Model T. With a 35-horsepower, 212-cubic-inch, four-cylinder engine and a 3-speed sliding gear transmission, it got here fully outfitted from the manufacturing facility with a folding top, electrical lighting, leather-based upholstery, electrical starter, windshield and speedometer. Originally constructed in the conventional manner, with steel panels over a wooden body, the Model 30 in 1923 grew to become the first-ever to supply an all-steel automobile physique. The brothers, in a belt-and-suspenders transfer typical of their conservative nature, added rivets to the welding for reinforcement.

Ford Phaeton Type Model A.

Bettmann/Getty Images FORD MODEL A
Model T’s successor supplied fashionable features at an economic system value
How many constructed: 3,572,610 produced between 1927 and 1931
Starting worth: From $430 (Roadster) to $640 (Convertible Sedan) in 1931
Nickname: ‘The Bonnie’

By the mid-1920s, it became obvious even to Henry Ford that his beloved Model T was being surpassed in options and within the market by competitors. So in 1926 the company set out to create a successor.
The first blueprints date to January 1927. With the company’s current vertically built-in production facility, and skill to make a lot of its own elements, work proceeded at an outstanding pace. Model T production ended May 26, 1927. The growth of the new automobile, named “Model A,” was introduced on August 10, 1927. The first Model A was assembled October 21 and the car was introduced publicly on December 2, 1927. Just over three,800 have been inbuilt calendar year 1927.

For an economy automotive, the Model A boasted a quantity of hardly ever seen improvements, together with four-wheel hydraulic-lever shock absorbers, self-adjusting four-wheel mechanical brakes and a laminated safety-glass windshield. Henry Ford’s son Edsel up to date styling and design features with crowned fenders and decrease ride top.

On February four, 1929, Ford constructed its one millionth Model A; the two millionth adopted on July twenty ninth, barely six months later. But by 1931 the Model A, too, had been surpassed by a horde of voracious rivals. Chevrolet in Washington, D.C., circa 1940.

Louise Rosskam/Buyenlarge/Getty Images CHEVROLET AE INDEPENDENCE SIX
The first Chevrolet to outsell Ford (beyond the 1927 Ford shutdown for Model A changeover)
How many constructed: 623,901 in model year 1931
Starting worth: $475 to $650
Nickname: ‘Stovebolt Six,’ as a end result of its fasteners resembled common hardware-store stovebolts

Chevrolet introduced the Six in 1929, simply after Ford brought out the Model A. With its overhead-valve six-cylinder engine, it was marketed with the slogan “A six for the worth of a 4.” It took Chevy, and the Depression, two years to whittle away the celebrity aura surrounding the Model A, however the Chevy Six’s options and worth quickly made an impression.

Read More: 12 of the Most Iconic Cars in TV History

For one factor, the 1931 Chevrolet’s 50 hp bested Ford by 10 horsepower. And even with the introduction of the powerful Ford V-8 in 1932, the 1932 Chevrolet’s 60 hp was solely 5 ponies less than the V-8. It was also smoother working and free of the V-8’s rattly ride. It arrange a seesaw battle for quantity between Ford and Chevrolet that endured via the subsequent many years. Ford Model 18 V-8.

Simon Clay/National Motor Museum/Heritage Images/Getty Images FORD MODEL 18 V-8
The first low-priced V-8
How many built: 178,749 built in 1932, tens of tens of millions more through 1953
Starting value: From $460 for the standard Roadster to $650 for a convertible sedan
Nickname: ‘Deuce’

Henry Ford had been experimenting with unusual multi-cylinder engines even earlier than the Model A. He rejected an inline six as being a copycat, looking for one thing distinctly different to perpetuate the picture of Ford as the car innovator. A more powerful V-8 for a low-priced car offered that innovation.

Development went on in full secrecy in a workshop used by Henry Ford’s revered friend, inventor Thomas Edison, which Ford had moved to Michigan. The first prototype was completed in May 1930. The Ford V-8 would go on to upend the American automobile business. Its 221-cubic-inch V-8 engine produced sixty five horsepower, over 50 percent more than Model A. It had a single-piece cylinder block and crankcase, a marvel of foundry expertise at the time. The V-8 was quick and inflexible, and it dropped right into the space designed for the Model B four-cylinder engine already deliberate for manufacturing in 1932. That meant no expensive factory re-tooling.

The Ford V-8 did have problems, like cooling issues that had been never adequately solved. But its mild weight, reliability and substantial energy laid the bottom for American automobile engine development for years to return.

Even financial institution robbers John Dillinger and Clyde Barrow wrote to Ford to express their appreciation for the Ford V-8. Barrow and his girlfriend Bonnie Parker met their finish in a bullet-riddled 1934 “Fordor” (the company’s pun) sedan. Duesenberg Model J.

Courtesy of Rick Carey

Glam in the excessive: the pinnacle of Classic Era design, performance, quality and style
How many constructed: About 480 between 1929 and 1937
Starting price: $8,500 for the chassis, with out coachwork—enough for ten Model A Fords
Nickname: ‘Duesy’

E.L. Cord turned proprietor of Duesenberg Motors in 1926 and gave Fred Duesenberg easy instructions: Design the best, fastest, most luxurious automobile in the world. It arrived on December 1, 1928 and it was every thing Cord could ask for, surpassing its opponents in practically every respect.

Its graceful, swooping traces and opulent supplies supplied the perfect conveyance for image-conscious Hollywood stars and captains of industry. Whether an ordinary 4-door sedan or a customized speedster, bodies reflected the finest work of the most effective coachbuilders in the united states and Europe, boasting every little thing from bright chromium outside exhaust pipes to intricately inlaid fantastic wooden interiors and richly embroidered materials.

Its eight-cylinder engine produced a claimed 265 horsepower, nearly twice that of its most powerful American up to date. Even with the heaviest formal coachwork, the Model J may simply exceed one hundred mph. But that wasn’t enough. So August Duesenberg developed a centrifugal supercharger that raised output to 320 horsepower.

Read More: These Vintage Hot Wheels Toys Are Worth Thousands of Dollars

Given the high value of the chassis and its coachwork, Duesenberg purchasers had been wealthy. Movie stars Gary Cooper and Clark Gable had particular supercharged short-wheelbase convertible coupes built. Chewing-gum magnate Philip K. Wrigley, Bill “Mr. Bojangles” Robinson, big-band conductor Paul Whiteman, sweet heiress Ethel Mars and many more owned Duesenbergs—sometimes a succession of them. International Peace Mission founder “Father Divine” had a custom-bodied stretched Duesenberg that seated eleven with a raised rear seat underneath a detachable roof section that allowed the 5-foot-tall preacher to be extra readily seen when giving speeches by way of the car’s built-in public-address system.

J.L. Elbert’s guide on the marque is subtitled “The Mightiest American Motor Car.” The Duesenberg is so mighty that he may have overlooked “American.”

Promotional portrait of the Chrysler Airflow, 1934.

PhotoQuest/Getty Images

Brilliant scientific engineering caught in the crush of the Great Depression
How many built: 35,740 between 1934 and 1937
Starting worth: $1,345

Walter P. Chrysler was an American Horatio Alger story, working his method up from farmhand to manager of the American Locomotive Works’ Pittsburgh factory, then to Buick. He successfully ran Buick for Billy Durant’s General Motors at a 1917 wage of a virtually unimaginable $175,000 per 12 months plus inventory, then left to start his own car company.

When Willys Motors was subsumed into the GM fold, its engineering team—Carl Breer, Fred M. Zeder and Owen Skelton—joined up with Walter Chrysler. It was a wedding made in engineering heaven, and their finest accomplishment was the 1934 Chrysler Airflow. It grew out of experiments Carl Breer began in the late Twenties with a small 20×30 inch cross-section wind tunnel suggested by the Wright brothers. The Airflow embodied the results of this and other wind-tunnel experiments with its teardrop shape, steeply sloped radiator grille and the first one-piece curved windshield. Although a light-weight body was used, the one-piece steel physique provided chassis rigidity, an auto business first. The engine was positioned over, not behind, the front-axle centerline.

The ensuing Airflow of 1934 was like nothing else worldwide. Initial enthusiasm for the concept was adopted by skepticism. Despite bold ads showing an Airflow pushed over a cliff, then pushed away, patrons weren’t planning on driving over cliffs. And with the Great Depression raging, few wished to splurge $1,345, 60% more than a standard Chrysler CA six sedan, to take a chance on advanced expertise. The Airstream disappeared three years later, a chance misplaced. Ford mild customized with pinstripes, whitewall tires, and clear lines.

Al Paloczy/The Enthusiast Network/Getty Images FORD
The first Ford designed and built without Henry Ford’s oversight
How many constructed: 1,118,740 inbuilt two fashions and two engines
Starting price: From $1,333 (Six Business Coupe) to $2,264 (Custom V-8 Station Wagon)
Nickname: ‘Shoebox’

With Ford wholly owned by its founding family, Edsel’s dying in 1943 and Henry’s in 1947 forced the next generation to take the reins and usher the corporate into the postwar era. That included designing the primary postwar mannequin: the 1949 Ford, a significant departure from traditional offerings.

Read More: Giant Teapots and Other Quirky Gas Station Designs

One look at the body design revealed the differences: Fenders integrated with the body. The sides flowed repeatedly. And the passenger compartment was easily rounded. Underneath, the transverse leaf springs that Henry had stubbornly clung to since horse-and-buggy days were gone, changed with coil-spring unbiased entrance suspension and longitudinal leaf springs for the live rear axle.

With civilian car production slowly gearing back up after Detroit’s massive war effort, both Chevrolet and Plymouth additionally launched redesigned vehicles in 1949, but neither did it as well, or as efficiently, as Ford: Chevrolet sold 1,037,600 and Plymouth, 508,000. The third-generation Ford team led by Henry Ford II had taken a shocking initiative and made it a hit. Chevrolet Corvette.

National Motor Museum/Heritage Images/Getty Images CHEVROLET CORVETTE ROADSTER
America’s sports automobile
How many built: 300 in 1953, four,640 in total between 1953 and 1955
Starting price: $3,498
Nickname: ‘Vette’

Starting in 1949, General Motors presented its annual Motorama, parading the company’s products and new-vehicle ideas. In 1953, each of GM’s then fiercely impartial divisions showcased their vision for a “sports automobile.” Most had simply restyled cars already in manufacturing. Buick weighed in with the Wildcat I, conceived by car-design guru Harley Earl, full with a foot-controlled radio and “Robo-static” hubs. Pontiac supplied the Parisienne, a two-seater with a landau roof and pink upholstery, meant to be driven by a chauffeur.

Chevrolet went for one thing fairly totally different: a small fiberglass-bodied two-seater patterned after the sexy British Jaguar XK-120 roadster. They called it “Corvette.”

It turned such a sensation that Chevrolet began low-volume, hand-built manufacturing at a plant in Flint. Only 300 have been inbuilt 1953 utilizing modified Chevrolet frames, suspension and a 150hp 3-carburetor model of its 236-cubic-inch overhead-valve six. All had Powerglide automated transmissions.

For 1954 Chevrolet moved manufacturing to a small devoted facility in St. Louis, planning to sell 10,000 Corvettes. They didn’t promote practically that many, however GM management, significantly the corporation’s legendary chairman Alfred P. Sloan, felt it had a place within the corporation’s secure and added welcome sizzle to the brand—particularly when crosstown rival Ford announced the two-seat Thunderbird for 1955. That year, the performance of the Corvette’s brand new 195hp overhead-valve V-8 engine (a $135 option) began to alter the public’s perception. Chevrolet did reach its annual sales goal of 10,000, but not till 1960. Today Corvette manufacturing regularly exceeds 30,000 yearly, all tracing their ancestry again to these Polo White 1953 roadsters.

One of these avid spectators around the new Corvette on the New York Motorama in 1953 was a Belgian-born Russian engineer with extensive racing experience in Europe, Zora Arkus-Duntov. He approached General Motors for a job, was employed and soon grew to become Corvette’s chief engineer. Despite chafing underneath GM’s corporate structure, he shepherded Corvette to its best early successes. Chrysler C300.

National Motor Museum/Heritage Images/Getty Images CHRYSLER C-300 TWO-DOOR HARDTOP
A smoking-fast luxury automotive for grown-ups
How many constructed: 1,725
Starting value: $4,109
Nickname: ‘The Banker’s Hot Rod’

In automotive phrases, few years offered as a lot purpose to go automobile crazy as 1955, which noticed the discharge of V-8 versions of each the Thunderbird and Corvette, together with the favored ’55 Chevy. But for a lot of car enthusiasts, that year might be finest remembered for the introduction of the Chrysler C-300, which combined testosterone-fueled horsepower and sporty suspension with a good-looking, muscular design.

Based on the already opulent New Yorker Deluxe, it was styled beneath the supervision of Virgil Exner, whose famed “Forward Look” design conveyed an eager, poised-for-action look. It came in only one body type, which was configured from inventory elements, and in solely three colours (white, purple or black). It was upholstered in tan leather.

Chrysler engineers beefed up the C-300’s suspension to cope with its 331-cubic-inch Hemi engine (so-called for its hemispherical combustion chambers), which boasted dual four-barrel carburetors and 300 horsepower—more than some other 1955 American automotive.

Despite weighing in at a hefty 4,000-plus pounds, the C-300 proved its mettle on the track. A fleet of them entered by Mercury outboard-motor firm proprietor Karl Kiekhaefer swept the 1955 racing season almost clear, successful some 37 AAA and NASCAR races of 100 miles or more. Instantly recognizable on the street, it commanded respect at each stoplight, but its cost meant that in pretty much every case a suit-and-tie-wearing swell was at the wheel. Tom McCahill, auto writer for Mechanix Illustrated magazine, called it “as stable as Grant’s Tomb, and a hundred thirty times as quick.”

Two-tone 1955 Chevrolet Bel Air with whitewall tires.

Eric Rickman/The Enthusiast Network/Getty Images CHEVROLET
The debut of the ‘smallblock’ Chevrolet V-8
How many constructed: 1,830,029 in all body styles
Starting worth: 2-Door Sedan V-8 prices ranged from $3,055 for a a hundred and fifty to $3,125 for a Bel Air
Nickname: ‘Smallblock’

An argument could be made that it was the ’55 Chevrolets’ redesigned bodies—with their balanced proportions and restrained chrome—that helped push Chevrolet’s 1955 model-year manufacturing to its highest ever. But these results in all probability wouldn’t have been achieved were it not for the car’s brash under-the-hood bonafides: a high-revving 265-cubic-inch V-8 that powered Chevy’s success that 12 months.

Developed underneath the supervision of Chevrolet chief engineer Ed Cole, the ’55 Chevy would in the end assist propel him to the chairmanship of GM. The small-block engine bristled with innovations. First was its mild weight: a powerful 41 kilos lower than the Chevy six. Its brief piston stroke, huge valves and wonderful cylinder-head design gave it unparalleled excessive rpm efficiency. The first fashionable short-stroke V-8, the Chevy smallblock V-8 would firmly cement Chevrolet’s place at the head of the pack within the horsepower race that was to return. DeSoto Adventurer.

German Medeot/Flickr Commons/CC BY 2. DE SOTO ADVENTURER
Muscle and fins
How many built: 3,069 between 1957 and 1959
Starting price: $3,997 for the hardtop, $4,272 for the convertible

Nowhere was Virgil Exner’s jet-age “Forward Look” physique styling taken further than in the top-of-the-line DeSoto Adventurer. The aesthetic emphasized length and sleek, swept, dart-like options. It was bolstered by dramatic two-tone paint schemes with shiny chrome borders. Taillights were housed in the trailing edges of the fins. Bumpers and grille were handled as massive chrome appendages. The Adventurer obtained standard TorqueFlite automatic transmissions and energy brakes amongst many different normal features. It also had gold plating for the trim accents.

As with the Chrysler C-300 two years earlier than, the real excitement growled under the Adventurer’s hood, within the type of a 345-cubic-inch Hemi V-8 with dual four-barrel carburetors that twisted out 345 horsepower. DeSoto proudly famous it was the one commonplace (i.e., not ordered as an option) engine in 1957 to make one horsepower per cubic inch displacement. In a horsepower race, this was the automotive to have in 1957, with flamboyant fashion to match its efficiency. Edsel Corsair.

Ken Fermoyle/The Enthusiast Network/Getty Images

A dramatic new middle-market entry marked by utter failure within the marketplace
How many built: a hundred and ten,847 between 1958 and 1960
Starting value: $3,500 for top-of-the-line Citation hardtop coupe

By the mid Nineteen Fifties, Ford’s marketers believed the corporate was lacking the chance to upgrade existing customers by having only one middle-market brand, Mercury. The fix, which fell to the Special Product Operations workplace underneath Edsel’s son, William Clay Ford, was aimed at filling an ill-defined and tiny niche slightly below Mercury.

Ford Motor Company’s ad agency pitched 18,000 possible names for the brand new marque. But in a show of respect for his or her late father’s struggles to convey fashion and modern expertise to Henry Ford’s automobiles, the family-controlled firm selected “Edsel.” The final design marked a distinct stylistic departure from previous Fords, with scalloped coves in the rear fenders and a dramatic grille with an ovoid heart section that rapidly became generally known as a “horse collar.” Aside from styling parts, the push-button automatic transmission selector within the hub of the steering wheel, some rudimentary security features and different engine displacements, the Edsel was simply identifiable as what it was: by-product of Fords and Mercurys. Consumers weren’t fooled, gross sales stalled and Edsel disappeared after three years.

Ford Mustang in 1963, before it was launched to the public on April 17, 1964 on the New York World’s Fair.

Underwood Archives/Getty Images

The authentic Pony Car, creator of a complete class
How many produced: 263,434 between April and December of 1964, nearly overwhelming Ford’s manufacturing capacity; 1,288,557 first-generation Mustangs between 1964 and 1966
Starting price: $2,368 for a notchback hardtop coupe
Nickname: ‘Stang’

Named after a WWII fighter plane, the Mustang was unveiled by Henry Ford II on the 1964 World’s Fair. It was just a Falcon with new bodywork, built on the identical plant in Dearborn, but that made no difference to America’s automobile consumers in 1964. They eagerly adopted Mustang as a wholly new idea of a reasonably priced “personal car” with room for four—with a sporty profile aimed squarely on the rising market of baby boomers, who had began hitting driving age just some years earlier.

The Mustang’s significance in American automobile history can’t be understated. It rivals that of Henry’s Model T. Without it, there would never have been a “pony car” category, which incorporates Camaros, Barracudas, Firebirds, Javelins, Challengers and Cougars. It spawned issues like Carroll Shelby’s GT350, a rip-snorting pony automotive on steroids. It received uncountable races as the Boss 302. It set drag-racing information as the Boss 429. And practically 10 million gross sales later, it still exists right now, cleverly styled by Ford’s designers so when you draped a 2017 Mustang with a parachute it is nonetheless recognizable as a Mustang.

Lee Iacocca, ever the advertising showman (in one stunt, he had a Mustang cut in three items so he may get it to the top of the Empire State Building), championed the Mustang’s development and rode it to success, turning into president of Ford and later, chairman of Chrysler.

Advertisement featuring the 1960 Chevrolet Corvair.

John Lloyd/Flickr Commons/CC BY 2.0

An ingenious concept felled by one fault: swing-axle rear suspension
How many built: 1,695,765 between 1960 and 1969
Starting worth: $1,984 for Club Coupes
Nickname: ‘Vair’

“Compact” vehicles emerged as a class on the bumpers of Volkswagen’s Beetle and other profitable imports. Small, light-weight and modestly powered, a compact served basic transportation needs—and perhaps a little little bit of counter-cultural disdain for status. A flood of them got here from Detroit in 1960, and the driving public wolfed them up.

Whereas Ford’s Falcon and Plymouth’s Valiant had been conventional American automobiles with front engines and rear-wheel drive, Chevrolet’s sporty wanting Corvair was something however conventional, the only mass-produced American passenger automobile with a rear-mounted, air-cooled six-cylinder engine. Its distinctive styling, with its stubby nostril insolently freed from any semblance of the unnecessary radiator grille and prolonged tail across the pancake engine, left no doubt it was “different.” It was Motor Trend magazine’s “Car of the Year” in 1960.

But Corvair had one deadly flaw: a swing-axle impartial rear suspension. Drivers of vehicles like the Porsche 356 understood tips on how to deal with it, and only carefully approached its limits in high-speed cornering, however the common American driver had less expertise with the “tail-happy” character of the rear engine and swing axle, which generally led to spinouts.

Consumer advocate Ralph Nader featured the Corvair in his pejoratively named book “Unsafe at Any Speed.” In 1965 Chevrolet changed to wishbone rear suspension that eradicated the problem in a seductively redesigned Corvair, but it was too late. Even with the attraction of a turbocharged 180hp model of its 164-cubic-inch engine. Corvair passed away after 1969, a daring concept tripped up by unfavorable publicity and the burgeoning auto-safety movement. Pontiac Le Mans GTO.

Courtesy of Rick Carey

The prototype for ‘muscle cars’ with massive engines in mid-sized chassis
How many built: 514,793 between 1964 and 1974
Starting value: $2,963 for the GTO-equipped 2-door hardtop
Nickname: ‘Goat’

Pontiac Division president E.H. “Pete” Estes and his chief engineer John DeLorean needed Pontiac to challenge Chevrolet as GM’s most profitable division. Choosing performance as their weapon, they proceeded to introduce phrases like “wide track” and “Tri-Power” into automotive parlance.

DeLorean had developed a powerful 389-cubic-inch V-8 that might drop right into Pontiac’s present Tempest model after its 1964 redesign, however the fits at GM Headquarters on the 14th flooring of the GM building in downtown Detroit had put out an edict that massive engines could not be utilized in new fashions of mid-sized automobiles. So Estes and DeLorean discovered a simple workaround to the new-model rule: Make the 335-horsepower engines a mid-year choice within the Le Mans. It paid off with considered one of GM’s most profitable offerings ever, blossoming into its personal model in 1966 when the administration realized how much it appealed to consumers. With gross sales success, all restrictions have been off.

The GTO helped propel Estes to the presidency of General Motors and DeLorean to be head of Chevrolet. It also ignited muscle car madness. Chevy Vega.

NBC/NBCU Photo Bank/Getty Images

An ingenious method to a subcompact car
How many constructed: 1,966,660 between 1971 and 1977
Starting price: $2,090 for the 2-door sedan to $2,328 for the Kammback station wagon

In 1971 GM looked to have a hit when it launched the handsome, front-engined, rear-wheel-drive, sub-compact Vega. Its new engine, with a groundbreaking die-cast cylinder block, contributed to the Vega’s mild weight. Its single-overhead-camshaft cast-iron cylinder head aided efficiency. Individual bucket seats and a floor-shift 3-speed manual transmission got here standard, giving Vega a sports car flair. It was chosen by Motor Trend magazine as its Car of the Year.

Unfortunately for Chevrolet, it additionally rusted rapidly and the engine had vibration and cooling issues. A major redesign after a couple of years couldn’t overcome the unfavorable impression that had been made and the Vega was discontinued after 1977 with just over 2 million built.

Car and Driver chided Motor Trend by including the Vega on its list of “The 10 Most Embarrassing Award Winners in Automotive History.” The editors commented: “It was so unreliable that it appeared the only time anyone saw a Vega on the street not puking out oil smoke was when it was being towed.” Ford Pinto.

Joe Haupt/Flickr Commons/CC BY-SA

Economical, hugely successful within the marketplace—but with a deadly flaw
How many constructed: three,one hundred fifty,943 between 1971 AND 1980
Starting value: $1,919 to $2,062

In 1971, Time journal named Richard M. Nixon its person of the year. The movie “Love Story” was released. And Ford introduced a spiffy new small automobile called the Pinto. Despite promising starts, none of these would end well.

The Pinto, a project of marketing wizard Lee Iacocca, was Ford’s entry into the sub-compact market that yr, a homegrown answer to the slowly widening stream of small vehicles being imported from Japan and Germany. It used two completely different cast-iron four-cylinder engines engines (one 75 horsepower, the opposite 100) which had been built in England and Germany and were already proven in their residence markets. Bucket seats, a floor-mounted shifter for the usual four-speed guide transmission and rack-and-pinion steering sported up the driving expertise. In 1972 a beautiful and practical 2-door station wagon was added, and these three models would remain within the Pinto lineup till it was discontinued in 1980.

Pretty a lot anybody with a passing knowledge of vehicles, or who lived via the Seventies, knows what occurred next. With more than 1,000,000 Pintos on the highway quickly after its introduction, the car displayed a sometimes-fatal tendency to catch fireplace when hit within the rear. The drawback was in the end traced to the placement of the gas tank and its filler neck. Ford relocated those components for 1976 and later models. But in 1977, going through an impending recall order from the united states government, the corporate voluntarily recalled all pre-1976 Pintos to be fitted with shielding and reinforcements.

It proved to be a devastating and expensive blow to Ford and its prestige—particularly when, in 1980, the State of Indiana charged Ford Motor Company with reckless murder in a rear-ended Pinto fire. Although the company was acquitted, the charge and trial have been devastating to Ford’s broader status.

1960s magazine commercial for the Ford Shelby Cobra.

Classic Film/Flickr Commons/CC BY-NC

Brawn meets beauty within the ultimate European-American hybrid
How many built: sixty two with 260 engine, 453 with 289 engine (street vehicles only) in 1962
Starting price: $6,300
Nickname: ‘Snake’

The blistering-fast brainchild of American racing driver and entrepreneur Carroll Shelby, the Shelby Cobra made incarnate the belief you could by no means have too many horses underneath the hood. It was powered by an American V-8 and was final-assembled in California, but the chassis, physique and interior had been built by AC Cars in Thames Ditton, UK.

Theirs was a nifty marriage: Shelby was on the lookout for an American engine-European chassis project. And AC was in search of a model new engine for its light, stunning AC Ace roadster. Shelby approached Chevy for engines. Chevy mentioned something like, “For a Corvette competitor? We assume not.” Ford thought in a special way.

Introduced in 1962, the Shelby Cobra created a sensation among the automotive media—and wreaked havoc amongst its racing opponents. In 1965 Cobras received the GT class in 9 of 12 FIA World Championship races, taking the GT Championship. It would be a first for an American producer.

Shelby’s authentic Cobra spawned a separate trade to race, preserve, restore, present them and monitor their histories. Yet one other business creates replicas—some good, some bad and some downright ugly. The Shelby Cobra, whether or not in its authentic leaf-spring 260/289 configuration or its later coil-spring 427/428 evolution, has confirmed to be an American legend that also delivers thrills to house owners and onlookers alike. DeLorean DMC-12.

Ian Weddell/Flickr Commons/CC BY-NC 2.0

The final fling of a Detroit legend, John Z. DeLorean
How many built: 8,742 produced in 1981 and 1982
Starting price: $26,a hundred seventy five
Nickname: Flux Capacitor

This isn’t actually a narrative a few car. It’s a couple of automobile man, John Z. DeLorean, whose flamboyant way of life grated with suit-and-tie-wearing Detroit managers, but who produced outcomes wherever he worked. It was DeLorean who ignited the Muscle Car years with the LeMans GTO while he was Pontiac’s chief engineer. At Chevrolet, he drove improvement of the compact Vega and the frighteningly powerful Chevelle, main Chevrolet to its first year of 3-million-car-sales in 1972.

In between, he courted fashions and movie stars, splitting his week between working in Detroit and partying in Los Angeles.

DeLorean quit GM in 1973 after only six months as group vice president, and in 1975 started the DeLorean Motor Company to build what he called an “ethical sports activities automobile.” He talked the UK government into building an enormous new manufacturing facility in Northern Ireland, and in 1981 announced with nice fanfare the DMC-12, powered by a rear-mounted 2,850cc/130hp V-6 sourced from a Peugeot/Renault/Volvo consortium.

The body was clothed in brushed stainless-steel that retained fingerprints like a policeman’s blotter. Production high quality, in a word, sucked. The Ulstermen weren’t familiar with assembly-line production. And coordination between DMC’s British-based engineering, Northern Irish production and components suppliers was convoluted. The DMC-12 lasted two years.

Then John DeLorean was caught in a drug sting. Although he was acquitted of those charges— and a later fraud charge introduced by DeLorean Motor creditors and investors—his high-flying automobile career had crashed and burned. For its part, the DMC-12 was immortalized in 1985 when it was featured as Marty McFly’s time machine in “Back to the Future.”

‘K-Car’ promoting from the 1980s.

John Lloyd/Flickr Commons/CC BY 2. PLYMOUTH/DODGE ‘K-CAR’
A easy, efficient little automobile that rescued a whole corporation
How many constructed: 100,137 Plymouth Reliants, 95,450 Dodge Aries in 1981
Starting worth: $5,880 (2-door base sedan) to $7,254 (4-door station wagon)
Nickname: ‘Econobox’

At the beginning of the Eighties, Chrysler Corporation was moribund and certain for bankruptcy. Its premium vehicles were dated. Their production totals barely registered on trade sales charts: In 1980, Plymouth sold just over 14,000 front-engine, rear-wheel-drive Gran Furys.

Into this mix arrived two veteran Ford refugees, Hal Sperlich after which Lee Iacocca, both cast out of the kingdom by Henry Ford II. They seized upon the transverse-engined, front-wheel-drive K-car platform to resuscitate Chrysler Corporation, with the help of a federal authorities guaranteed mortgage.

The 30-mpg K-car may not get much respect these days, nevertheless it turned out to be the proper medication for the early 80s: Hal Sperlich was the best automobile man to get it constructed effectively, with reasonable quality, and Lee Iacocca was equally proper to promote it. Plymouth, Dodge and Chrysler ended up being saved by the K-car, and Chrysler Corporation paid off its authorities mortgage in 1983, seven years earlier than it was due. Dodge Caravan at the Walter P. Chrysler Museum.

An totally new class of car that redefined the household automobile; the origin of the ‘crossover’
How many built: 209,895 in 1984
Starting worth: $8,280 for both Plymouth and Dodge

Sneer if you like. Call it a testosterone killer. And simply try to find one that isn’t a magnet for half-drunk juice bins, stray soccer shin guards and Goldfish-cracker crumbs. But 30-some years in the past, as station wagons grew to become an more and more endangered species, the minivan proved a godsend for busy, growing households.

It was an thought Hal Sperlich had long championed at Ford: a front-wheel-drive van, based on a car chassis as an alternative of a truck one, with “one-box” design designed for households careening between the grocery retailer, clarinet rehearsal and hockey practice. Ford summarily rejected the idea. But after the success of the Chrysler Corporation K-cars, it was no stretch for the now respected Sperlich to renew his envisioned project with a K-car base.

The minivan debuted in late 1983 as a 1984 model. The front-engine, front-wheel-drive platform meant the Chrysler minivan had a low ground, simple entry and exit and unencumbered inside space. A sliding door on the best aspect meant children and groceries could be loaded and unloaded in cramped garages and parking-lot areas. Three-row seating accommodated up to 5 rear passengers. And seats might be eliminated to open up cargo area, accessible through a rear hatch.

Sperlich’s long-simmering thought ended up creating a wholly new class of vehicle. And despite feeble attempts from GM and Ford to adapt front-engine, rear-wheel-drive vans to the idea, it would turn out to be the dominant minivan design for a generation.

Rick Carey is an automobile historian and founder/author of Collector Car Auction Reports at

24 Cars That Made America
Tagged on: